Do people cool their vapor?

Curious if anyone is adding chillers to their vape

My set up for flower and concentrate vaping is a water pipe with a diffuser.

Then I add an ash catcher with a cloud buddy

The cloud buddy holds the bowl and has a cap you can pull to add air to your vapor for thinning

Single stem with two openings for bowls or combos like a bowl and a chiller.

1 Like

Not “chillers” like ice or cold glycerin. The hot vapor hitting the cold surfaces makes the vapor condense on the glass and not get to my lungs. I will use a small water piece / bong with my ball vape, not always with water, but not my often with the XQ2.

2 Likes

I prefer a cooled vapor from a small bubbler as well, something relatively small. I do like my Orb bubbler with the ball vape at times because the large volume allows for a big one and done pull.

This was my experience with the chillers I have used

Get a bit of build up

I don’t bring the vapor through the chiller

I use a cloud buddy and place my slurper or flower bowl on the far end and place the chiller in the other slot

Place concentrate or flower on the right side

Attach chiller to the left and use the cap to regulate the air going through the chiller.

helps some people who run really hot

They are good for taking the harshness out of carts that I use in my Omegatron

Fill up the chamber and use the revolver chiller to cool the vapor and reduce that harsh effect in the back of the throat

Remember a sip of cold water before and use a chiller if you have a raw throat from carts

@Glasspath - Just a heads up, I’m neither a mod nor a snitch, but I think vendors are supposed to badge their ID. You might want to check with mods and the rules that keep getting updated.

1 Like

Thanks for the warning

I would normally post pics as I have all the gear but I was trying to illustrate my point with the tools I have available to me.

Trying to find that sweet spot for people who have reactions to the vapor temp

Convincing people to lower their temps and take smaller hits can be difficult

They see tubers vaping a gram all at once

1 Like

we’re pretty relaxed here as long as it’s not spammy or interfering with the flow of information

do you have a site or anything @Glasspath ?

as for vapor cooling - i just use a bong. I’d like to get a Lidavel, but not until they make an 18mm intake version. I’ve tried the freeze pipes and they make the vapor too tickly. Lidavel is a nice temp, just too tight.

2 Likes

Have not used any of the freezepipes line. Would love to know by those experienced on the ease of cleaning? I prefer a pass through, and a side step glass pathway on the mega cube. Have the short glass mouthpiece with balls, and the longer with dimples. But whip to an arizer balled stem is my Fave way2Go. I’d share a pic if things were clean and presentable. Glass cooled by water. This is the Path. :smiling_face_with_sunglasses::vulcan_salute::green_heart:

1 Like

Cleaning is fairly easy

I boil some water, add a mason jar with 4-5 tablespoons of ethanol or Iso to heat (no open flame just put the mason jar in the hot water)

Lid on but do not tighten

A minute or two should warm the alcohol

Insert chiller and gently agitate

If you need a few runs you can cover the mason jar and set it aside so you can reheat the water

You can perform a reduction and reclaim the concentrate residual but not sure if the THC is still active

I had a YouTube channel with tutorial videos but I had music playing in the background and that A-hole got me when he was copyright striking everyone.

Channel got reinstated but then got taken down for content (cannabis concentrate making) then got reinstated, then got taken down

I gave up, the tube sucks

2 Likes

Very similar. I use a small bong not usually with water. I feel that Things are lost in the water beyond just the heat.

Perhaps a difference I adjust temp and amount too not use water mostly.

1 Like

:smirking_face: The dry bong seems to work best, when my throat has got a tickle.

CR

1 Like

I like air and distance from heat source. Water takes away a little bit so I avoid it. I either have a low amount or a low temperature so I control the amount of vapor well occasionall.

1 Like

I find dry vaping to be a bit harsh. Probably from years of smoking joints. Dry vaping through a system of glass like a water pipe and ash catcher does a decent job at cooling the vapor but not enough for my situation. One of my favorite ways to vape good tasting concentrate is to use my water pipe, ash catcher and cloud buddy. It allows me to use a chiller and introduce cool air and thin the vapor a little for some serious sweet hits. Live resin out of a banger without any flower mix is my absolute favorite but something that is rare because of using edibles primarily. Should mention I’m a light weight tolerance wise so micro dosing is not so micro.

1 Like

I use The Box by Lidavel. I pair it with the universal Baller or the Terp Hammer. But it can be used with any device. I have Lung issues and between the box and the hammer I can steer my hits exactly where I wanna go.

The hits are heavenly and I can control terp bite effortlessly, when using the Baller or Terp Hammer

LIDAVEL Cooling Tech

The Box’s cooling system is ready in minutes to provide you comfortably cool hits throughout your session, without over-cooling that causes ‘wet hits’ or excessive ‘reclaim’. Patented system utilizes technologies from computer, aerospace, and refrigeration industries in a carefully optimized design that gives you the unmistakable LIDAVEL experience

Easy To Clean

Open the glass door to easily clean your Box with a cotton swab or an alcohol wipe. No hassle. No uncleanable surfaces.

Versatile Compatibility

Use the Box with all of your heating devices & glass. Standard 14mm & 10mm tapers are used along with the whip system making it easy to use with all your favorites for your personalized set up

11 Likes

My vape station is going to look like my stereo system from the 80s.

3 Likes

lol. It serves up the finest hits I’ve ever had.
But I hear ya. It’s a health thing for me.
JV

3 Likes

I use a revolver chiller that stimulates the vapor enough to cool but not plaster it against the wall of the water pipe. Weird part is the ash catcher has little to no residue so most of the vapor makes it through to the water pipe. I get a circle of concentrate against the back wall about the size of a medium coin after a couple of grams of concentrate use. Get a small amount on the cloud buddy but hardly noticeable.

I have lung issues too and cooling the vapor does make it easier to consume.

Maybe see what kind of a discount there is on a 420 or holiday sale.

1 Like

Ya ok I will definitely keep my eye out. Thank you. I love trying out new things.

:saluting_face: JV

1 Like

I always have a dry bong filled with marbles stored in the fridge for when I have a sore throat or just want cooled vapor.

8 Likes

I don’t do this often but here’s is a great way to get some nice cold vapor from the bowle..no drink, just ice..Crushed ice preferably, but this works too..

4 Likes