Induction & Torch Heating Recipes

I don’t know if this will turn out to be a good idea or not, but decided to give it a go.

I’d like this topic to be used for posting recipes for heating various vapes as a general reference for everyone.

I’d request anyone posting here to use a template format so it is easier to search. The other thing this will help is allowing me as well as any other vape masters and other members with appropriate permissions to edit wikis for devices to add popular recipes into the main wiki topic for reference to new readers.

I’m thinking a basic template is fine like:

Device: Cloud Connoisseur Solaris

Heating Method: Torch - Blazer Big Shot

Time/Wattage: 18 seconds

Focus point/Depth: 1/3 from top of cap

Tips: Rotating is not necessary but results in about the same roast

I’m open to ideas on a better template for sure, just putting what came to mind to finally get this topic going.

8 Likes

I was just thinking about something similar to this as I feel the need to keep asking people who post about using manual vapes what settings they use on the wand etc.

Like this comment

I want to guess wand at max setting 55-60 seconds.

I will test with my Dani Fusion 2 and TA3 and my torch later and post results.

2 Likes

I think it’s a great idea. Especially something like heating times and torch techniques would be a great tool for anyone from vape master to novice to learn a new device more effectively especially the analog devices. Often I have found the “clicks” to be unreliable and any help with technique/timing/loading needs per unit etc. here is a go with your format @McScruffy

Device: Tempest 2 slim in titanium with titanium core

Heating Method: Induction Heater (IH) YLL 3.0

Focus point/Depth: Bottom stopper 1/8” (3-4mm) up from bottom out.

Time/Wattage: 85W @ 36 seconds, or 7 seconds past 2nd click.

      Target: shoot for 2nd Visual indicator 

Tips: Rotating is not applicable

**Targeted Result ** 2-3 flavorful hits with mildly roasted bud

Something along these lines @McScruffy?

2 Likes

Great idea! Let me give it a shot

How to roast the shit out of your herb - two Tempest + YLL methods for full extraction

Part 1:

Device: Tempest 2 with Ti heater core

Heating Method: YLL induction heater 3.0

Time/Wattage: 37 seconds @ 100W

Focus point/Depth: As dictated by YLL’s stopper tool

Tips: Designed to get the punchiest most convection-y hit possible while still getting all herb to a good brown. Best with a water piece and going for as close to OHE as possible.

Part 2:

Device: Tempest 2 Slim SS w/ SS heater core

Heating Method: YLL induction heater 3.0

Time/Wattage: 57 seconds @ 85W

Focus point/Depth: As dictated by YLL’s stopper tool

Tips: This is for the evenings before bed when I wanna get all stoney stoned, or if I wake up in the night and can’t sleep. Seems to work best with smaller MTL hits, although the Slim doesn’t actually fit my Chugga-Jug properly for me to test lol.

I know these settings are wayyy beyond what you’ll see recommended on the Mad Heaters site so I’m interested in the reaction I’ll get here, if it seems fair given the level of extraction I’m going for or if people think they’re far too much. Never had any issues with coming close to combustion or anything.

1 Like

Wand at 320°C.

Tempest 1 : until the wand stop to flash and 3s more. Let cool 25s before take the draw.

TA3 : 18 flash, stop 3s, launch again until the end. Wait 25s and take the draw.

Both I use with quite open bubbler and open glass stem.

2 Likes

Device: Tempest 2 with rubies through water. Full bowl, airflow cap fully open, stem fully closed

Heating Method: Yll 3 Induction heater

Time/Wattage: 80W 45S = dark roast

Focus point/Depth: All the way down

Tips: I like to suck pretty hard on my bubblers, so if you prefer to pull more gentle then I would suggest taking off 2 or 3 seconds.


Device: Tornado through water

Heating Method: Yll 3 Induction heater

Time/Wattage: 100W 29S = dark roast

Focus point/Depth: All the way down

Tips:

  • Don’t screw the bowl into the cap too tight, otherwise there is a real risk of thread lock. Only screw until you feel the first resistance. The bowl will still take a few minutes cooldown before you can unscrew it, but it will never lock permanently that way. If you want to do back to back bowls, then you have to keep the bowl unscrewed ever so slightly.

  • When heating the Tornado with the Yll 3, disregard the clicks. For me they always occur when I’m already hitting it. If I waited for the click, then I would combust using the above settings. Guess this has to do with the 100Ws and the deep seat in the Yll, but I prefer a quicker heat-up. Apparently the clicks work fine when using a torch. Also, no rotating required when torching.


I will also post about my Punch V2 now, but please take that with a grain of salt, as I rarely use it and therefor have limited experience.

Device: Dani Punch V2

Heating Method: Yll 3 Induction heater

Time/Wattage: 100W 23S = somewhat dark roast

Focus point/Depth: All the way down

Tips:

  • The Punch V2 heats up and cools down quickly. That means most users will need 2 or even 3 heat cycles to fully cash a bowl.
  • Respect the clicks! The quick heat-up makes waiting too long after the clicks very dangerous, especially when reheating.
1 Like

Yeah not stuck on a specific template just want to make sure important details are there and there’s some structure to it. Looks great!

@420vapezone is it possible to set this thread to nested mode? I think it will be more appropriate for the goal here (recipes get up votes to help find the best ones for each device and direct comments to specific recipes easy to follow)

i don’t think it’s possible to change just a single thread

1 Like

Device: Vestratto Anvil

Heating Method: Dr. Dabber Switch

Time/Wattage: Crystal Mode → 2 Yellows

Focus point/Depth: Drop it in and leave it alone.

The original Dr Dabber Switch was my first concentrate device, and I bought it specifically because it uses induction to heat the cup. As I started acquiring other devices, the Switch was repurposed and turned out to be a great induction heater for other devices like the Anvil. If you have one, just set it to Crystal mode, turn it all the way up and wait for the clicks, or just set it to 2 yellows (give or take) and it’ll match up from a cold start with just a little additional heat added.

2 Likes

Updated topic name to be more normal and less my techie (il)logical mind

1 Like

Flare V2 (2 spacers installed at bottom for all settings)

TA4 (3mm SiC): boost mode (130w) 40s

Stunner SS (3mm SiC): boost mode (130w) 45s

Stunner Ti (3mm SiC) 100w 45s

Joystik (3mm SiC): 100w 40s

Hydro: 100w 36s

Simrell Ti: 100w 22s

Anvil: boost mode (130w) 21s

YLL 3.0 (ceramic spacer flush with bottom of glass tube)

Tempest 1 (upgrade kit and 3mm SiC): 85w 33s

Tempest 2 (Ti Heater Core): 85w 33s

Tempest 2 SS (SS Heater Core): 85w 43s

Anvil ThermoCore: 85w 38s

Tornado: 85w 31s

Wand:

ModulA (3mm SiC): 320c cold start

Looking for settings for (yll): stunner, TA4, hyper tip with both caps, modulA

(flare): tornado, hyper tip with both caps

3 Likes

YLL 3.0 with 3 dimes set as spacers. 60w and lower I use P42A cells and 80w-100w I’ll use another heater with P50Bs. Everything uses the same depth setting except Camouflet devices, they are lowered until the fins of the head are flush with the heater only heating the top of the vape. I also find Camouflet devices need two heat cycles for a full extraction, that’s the second temp listed.

M7 + Captive Cap:

  • 60w 22-28s
  • 45w 38s
  • 30w 60s

M7 + CC +CA:

  • 60w 44s

G3 + Captive Cap:

  • 60w 20s

G3 + CC + Cap Armour:

  • 60w 38s

G3 + Perf Cap + CA:

  • 60w 36s
  • 45w 46s
  • 30w 60s

G3 + Armoured Cap:

  • 60w 36s

Helix + Perf Cap + Cap Armour

  • 80w 34s
  • 60W 36-45s
  • 45w 60s

Halo + captive cap

  • 60w 16s

Halo + armoured cap

  • 60w 35s

Halo + perf cap + armour

  • 60w 37s

Vaphit X + Dyna Captive Cap:

  • 60w 18s

Vaphit X + CC + CA:

  • 60w 43s

Vaphit X +Armoured Cap:

  • 60w 30-44s

Vaphit X + Perf + Armour

  • 60w 34-45s

Simrell Titanium

  • 60w 47s

Convector V2:

  • 80w 11s 8s
  • 60w 14s 11s
  • 45w 19s 14s

CXL + Super Cap:

  • 100w 20s OHE
  • 100w 18s 14s
  • 80w 22s 18s
  • 60w 30s 25s
  • 60w 36 OHE

CXL+ Camo Cap:

  • 100w 15s 11s
  • 80w 19s 14s
  • 60w 25s 18s

Ceramo XL + Camo Cap:

  • 80w 17s 13s
  • 60w 22s 18s

Ceramo XL + Super Cap:

  • 80w 24s 20s

Dani Fusion 2.0 + SUS430:

  • 100w 24s
  • 80w 34s
  • 60w 47s

Tempest 2 (stock):

  • 100w 33s
  • 80w 41s
  • 60w 55s

Tempest 2 (2.5mm Gemcut Rubies)

  • 100w 38s
  • 80w 47s
  • 60w 60s

Tempest 2 (titanium core)

  • 100w 33s

Crown Cap (rubies)

  • 85w 60s 15s bowl preheat
  • Reheat 20-25s after vapor stops and stir

Solaris

  • 100w 55s
6 Likes

So I just tested my Dani Fusion 2 with this torch

I am heating at the very bottom of the cap only and it took me 27 seconds first test and 29 seconds second test.

1 Like

I use that torch for two years now with my stick vapes, I enjoy it.