Hello everyone,
i want to share my favorite way to combine dabbing and flower vaping (even though i think its better to just take a dab).
You can use a S&B dosing capsule if your terp slurper has the right size, for my slurper it fits perfectly. Just put a bowl shaped screen on top which is very important because if the capsule can move the hot air will not flow through it. Make sure the marbel is sealing the top and not lifted by the screen. I aim for 315°C (600F) and start hitting the hot air through the dosing capsule to extract the herb until my lungs are half full and the slurper cooled down to 270°C (520F) to then feed the dab into the slurper.
I use an electronic heater to heat up the slurper to get good temperature control. The dosing capsule needs some time to heat up before you get a good extraction, by putting in the capsule while its still heating its possible control the ratio of convection to conduction.
More conduction and thus more intense vapor if you heat the capsule longer.
You can fill the slurper with terp perls to store more heat and extract at lower temps or use a pillar if you don´t mind that its spinning dry for the first half hit. I get a good even extraction of the flower, but it mostly happens before i add the dab because the dab
cools the slurper down.
