Transient Mist Flow Pro & TVibe — Two New Dry Herb Vaporizers

[TKVape]

Quick interesting news for the community

Soothing Vapours, a Canadian DHV retailer that works closely with Chinese manufacturers like YLL, just revealed in their newsletter that they’ve been involved for about four months in testing two new Chinese dry herb vaporizers: the Transient Mist Flow Pro and Transient Mist TVibe.

A team of testers was able to try the prototypes and provide feedback to help improve the devices before release.

According to Soothing Vapours, the designer already has solid experience developing and manufacturing vaporizers.

What really caught my attention, though, is the philosophy behind the project: robust construction, repairability, right to repair, and technical transparency. Apparently, the manufacturer even plans to publish a complete teardown of the devices along with a BOM/component list.

After roughly four months of testing, feedback, and improvements, both vaporizers are reportedly now ready to move into production.

Soothing Vapours should be sharing the full specifications and pricing soon, and they’re hoping to receive the first production units in Canada around mid-October.

Transient Mist’s new website should also be launching soon. I’ll share the address here as soon as it’s confirmed.

Now, I don’t know about you guys, but looking at the photos, I immediately noticed a few things that remind me quite a bit of the Frolic: the color options, the combination of plastic and aluminum, and even some of the overall design choices.

Obviously, we still don’t know what’s actually going on under the hood, so I’m not suggesting they’re technically similar. But visually, those Frolic vibes immediately jumped out at me.

Anyway, these look really interesting!

I’ll post the photos from the newsletter below.

I’ll be following the Flow Pro and TVibe closely and will keep this thread updated as soon as we get more information about the specs, pricing, performance, website, and availability.

[Redeyescotty]

Interesting look based off the same heater as frolic due to specs and screen/shape.

[grindy]

Even has the Frolic colour scheme.

[Northernhigh420]

looks like a Temu Frolic

[Cmdr.Redeye]

That’s well-said. Eyeing this Temu Frolic with suspicion. Even the cooling stem with gems.

CR

Edit: 18650 battery won’t work well for me. 21700s have 40% more chemistry, used to it.

[UPdownLoAD]

Pricing and a ton of pics/info is posted on their website:

Transient Mist

[Northernhigh420]

well good news they couldn’t of made it uglier if they tried

[Cmdr.Redeye]

Sure seems heavily influenced by Frolic. A bit more capable than Lobo, but possibly anemic without that big battery.

CR

[TKVape]

Thanks! I tried yesterday and it wasn’t accessible yet, so it looks like they must have put it online overnight.

[Charles]

@Cmdr.Redeye One of them is 18650, the other device says P50, I’m pretty sure that is 21700 isn’t it?

[Rodney]

@TKVape

A team of testers was able to try the prototypes and provide feedback to help improve the devices before release.

I would be much more interested in this device and trust what I hear back if this team of testers were forum members. However I do still like what I am reading about this and look forwards to some of you guys testing this out.

[Charles]

Yeah, lets see what reviewer we know say about them. It is nice to see some stuff coming out closer to the price of the Solo 3, if it can compete in performance.

I also like the DIY architecture and being able to repair and modify assuming it doesn’t destroy the warranty, but that would largely depend on cost and availability of parts. Repairable is meaningless if you can’t get parts.

[TKVape]

IN SUMMARY — TRANSIENT MIST: FLOW PRO vs T VIBE — WHAT ARE THE REAL DIFFERENCES?

Yesterday, I shared the first details about the two new Chinese dry herb vaporizers from Transient Mist, the Flow Pro and T Vibe, especially after Soothing Vapours announced that they had been involved in testing the prototypes for several months.

Well, the official Transient Mist website is now live, and we finally have access to the detailed specifications of both devices.

And on paper, there are definitely some very interesting things here.

TRANSIENT MIST FLOW PRO

The Flow Pro clearly seems to be the model more focused on performance, extraction, and versatility.

HEATER

• SUS316L stainless-steel foil heating element

• Thickness: only 0.05 mm

• Heating surface area: 75.6 cm²

• Heats from room temperature to 200°C in just 3–6 seconds

• Temperature range: 40–240°C

The idea behind using such an extremely thin metal foil is to reduce thermal mass, allowing the heater to react very quickly.

AIRPATH

The airpath is separated from the electronics and made from CNC-machined PEEK.

According to Transient Mist, this means the vapor does not come into contact with the battery or electronic components.

ALUMINUM BOWL

This is probably one of the features that most clearly differentiates the Flow Pro from the T Vibe.

The Flow Pro uses a machined aluminum bowl, designed to absorb heat quickly, distribute it evenly, and stabilize temperature during extraction.

So there is clearly a thermal contribution from the bowl in addition to the hot air.

BATTERY

• Molicel P30B

• 18650 format

• 3000 mAh

• Removable battery

So when the battery runs out, you can simply swap in another one.

INTERFACE

• 0.96" color OLED display

• 4 physical buttons

• Adjustable temperature from 40–240°C

LOADING

Two options:

• Load herb directly into the bowl

• Use dosing capsules

So the Flow Pro is clearly designed with convenient portable use in mind as well.

CONSTRUCTION

The design is modular, and the device can be disassembled for cleaning and maintenance.

The different modules are designed to be serviced independently, and the battery is physically separated from the heating area.

Weight: approximately 230 g with battery

Currently listed price: $236–$248 depending on configuration.

-–

TRANSIENT MIST T VIBE

The T Vibe takes a fairly different approach.

Transient Mist explicitly describes it as a FULL-CONVECTION vaporizer, with more emphasis on flavor, airflow control, and battery life.

HEATER

It also uses a 0.05 mm SUS316L stainless-steel foil heater, but here the foil is formed into a cylindrical heating chamber with a 10-turn structure.

• Surface area: 75.6 cm²

• Heats to 200°C in 3–6 seconds

• Temperature range: 40–240°C

FULL CONVECTION

Unlike the Flow Pro and its conductive aluminum bowl, Transient Mist explicitly describes the T Vibe as using a full-convection architecture.

Hot air therefore passes directly through the herb to perform the extraction.

ADJUSTABLE AIRFLOW

And this is probably one of the most interesting features of the T Vibe.

It has a true continuously adjustable AFC — Airflow Control system.

A dial allows you to adjust the opening from:

2.2 mm to 6 mm

At 2.2 mm, the draw becomes more restrictive.

At 6 mm, the airpath is much more open and draw resistance is reduced.

Transient Mist does not currently provide an airflow measurement in L/min, so for now it’s impossible to directly compare its maximum airflow with devices like the Venty or Frolic.

BIG BATTERY

The T Vibe moves up to a 21700 battery:

• Molicel P50B

• 5000 mAh

• Removable battery

That gives it significantly more capacity than the Flow Pro’s 3000 mAh battery.

INTERFACE

• 0.96" color OLED display

• 3 physical buttons

• Session Mode

• Demand Mode

• Temperature range: 40–240°C

It also has a small window that allows you to see the herb during extraction.

MODULAR CONSTRUCTION

Like the Flow Pro, the T Vibe is built around a modular, repairable architecture.

The battery compartment and heating module are physically separated and can be serviced independently.

Weight: approximately 230 g with battery

Currently listed price: $215–$228 depending on configuration.

GLASS & WPA

Both devices use standard 16 mm glass tubes.

The announced packages also include:

• 14 mm WPA

• 18 mm WPA

• Two 16 mm glass tubes

• USB-C cable

• Molicel battery

• Cleaning brush

• Silicone O-rings

• Replacement screens

RIGHT TO REPAIR

This might actually be one of the most interesting aspects of the whole Transient Mist project.

Both devices were designed around a philosophy of modularity and repairability:

Standard replaceable batteries

Devices that can be disassembled

Accessible components

Modules that can be serviced separately

Easier cleaning

Clearly identified parts and materials

This is exactly the kind of philosophy I’d like to see more of in the dry herb vaporizer industry.

SO WHAT’S THE REAL DIFFERENCE BETWEEN THE FLOW PRO AND T VIBE?

Even though they share the same DNA, these clearly aren’t just two cosmetic versions of the same vaporizer.

FLOW PRO = PERFORMANCE / EXTRACTION / VERSATILITY

18650 Molicel P30B

3000 mAh

0.05 mm SUS316L heater

Conductive aluminum bowl

Dosing capsules

40–240°C

3–6 second heat-up

4 buttons

Architecture designed for fast, stable extraction

T VIBE = FULL CONVECTION / FLAVOR / AIRFLOW / BATTERY LIFE

21700 Molicel P50B

5000 mAh

0.05 mm SUS316L heater / 10-turn structure

Full convection

Adjustable airflow 2.2–6 mm

Session + Demand Mode

40–240°C

3–6 second heat-up

Greater battery capacity

So, in one sentence:

FLOW PRO = the one that seems designed to extract hard, fast, and efficiently.

T VIBE = the one that seems designed to maximize convection, flavor, airflow control, and battery life.

Personally, on paper, the T Vibe really catches my attention because of the full-convection design + P50B 5000 mAh battery + adjustable airflow up to 6 mm.

But obviously, these are still just specifications.

The real test will be seeing how these devices actually perform: vapor quality, power under load, thermal stability, vapor density, flavor, AVB uniformity, hotspots, battery life, and real-world airflow.

On paper, though, these two new devices definitely deserve our attention.

SOURCE / OFFICIAL MANUFACTURER WEBSITE:

Transient Mist

[Charles]

I wish they had put the big battery in the Hybrid device. The fact the hybrid uses 18650s leads me to believe it doesn’t have the power.

[Sabina]

It looks like the Frolic and the Tinymight2 got a baby and they called it T VIBE

[dude_de]

Flow Pro Manual2 – Transient Mist

The manual sure looks like the Tempest 2 manual As does the website and the “no shipments below 135 to Germany” banner.

[Cmdr.Redeye]

Info coming in. Yes, both sizes used… The model I was interested in took 18650. Still, let’s see. Competition is good for consumers.

CR

[TKVape]

This is just my personal take based on the specs and heating architectures: the Flow Pro seems to follow more of a Frolic-style philosophy, with aggressive extraction where hot air and the heat stored in the bowl work together. The T Vibe seems closer to the Tinymight 2 philosophy: full convection, highly responsive, with extraction controlled much more directly by your draw.

In short, the way I personally see it: Flow Pro = Frolic-style approach; T Vibe = Tinymight 2-style approach.

And maybe it’s not even a coincidence that their names seem to line up with the vaporizers they remind me of: “Flow” → Frolic, and “T Vibe” → Tinymight 2. Of course, that’s purely my own speculation — I have no idea whether Transient Mist actually intended any connection with those names.

And that doesn’t mean they’ll perform the same way either. This is simply my interpretation of the designs on paper — we’ll need real-world testing to see how they actually behave.

[TKVape]

I don’t like to generalize. There are Chinese manufacturers doing excellent work, like we’ve seen with JCVAP. But with some others, you can still see that old habit of making cheap knockoffs: instead of developing something truly original, they take what already exists, copy it, adapt it, and try to make it cheaper.

And then there’s the website. It even appears to have been based on the Mad Heaters website and adapted for their own products, but apparently they forgot to remove or replace some of the original manuals/content.

[McScruffy]

That thing looks like Frolic, Tinymight, and a DNAc mod had a baby lol.

Sounds curious and looks weird enough to pique my interest… following

Also, I love the ability to see the herb in the chamber in use! It’s a nice QoL thing so you aren’t popping the cap off if you are trying to check roast level.