The WOHW is a wireless ball vape with a dual interface. One side is an 18mm injector while the other is a 22mm diffuser.
This vape was a collaborative effort between Charles at TheDabHut, Scott at VGoodieZ, and others.
This is a budget-oriented design with massive performance.
This post is a wiki.
Hey Hey! We’ll get more active in here and other threads soon. Reach out if anyone has questions about this or some other Crossing products.
Props on the V2, running 2 configurations of it and it solves every issue of V1.
Does this vape work will with hash? I feel like the small glass bowl and the conduction would make it work well but I don’t have any to hand as I don’t have a vape that works well with hash
Works great with hash. Nestle it was with some flower or vaping fiber. I used degummed hemp fiber on a V1 with 2.5mm Sic balls at 475.
Makes sense will have to give it a try at some point thank for the explanation
What issues did you have with the V1 that was solved with the V2? I have a V1 and wondered if it was worth upgrading? Thanks for any insight Q
Primarily it was made of TI, so heat retention wasn’t the best. The gem cuts it used also not the greatest for flavor.
And the biggest issue is that it isn’t a standard size. It’s slightly smaller, I believe 21.5mm and not 22mm so bowl compatibility was not standard.
For me, I found that the thermal mass increase of the V2 maintained heat and that temperature a bit longer so I was actually able to turn down the temps even more.
I never heat soaked my bowls either so that initial thermal transfer sucks the heat out the second you touch the bowl. For me, that makes for a quicker single hit session and I really appreciated the V1 mostly for the microdose bowl but you tend to have to wait for the temps to come back up for consecutive hits. The V2 just has more thermal mass so that swing in temps is less so in my opinion, I felt that you could use it sooner.
I upgraded the V2 wireless to the wired coil and that has become my go to because all of those little inconveniences for me made the wired setup work so much better.
And I also just went for the dual PID so now I run my wired coil and the original V1 coil and I either do bangers in it for torchless dabs or keep the V1 there to use as my mood suits.
Just a FYI for the community…if you have a TinyMight2 with the metal water pipe adapter bowl similar to this one below you can use it as a bowl for your WOHW with the injector end. Fits perfectly well just as the glass Micro dose bowl it comes with.
That looks like a link to get one if people don’t have it already. I was just reading the thread but will probably pick up a titanium one for the Frolic. Sorry for the mostly OT reply but wanted to share a link to the item.
Great option and metal can add some conduction to the hits. Keep the bowls preheated, cold metal bowls can act as heat vampires 
a bit. Another fun bonus of the WOHW, keeping the bowl preheated as the head sits in the coil.
That’s what I was thinking and tried as well. When I tried it the first time I only gave it a 20 second heat soak from the heated ball vape directly on the bowl which did still give me a decently toasted hit but leaving on the ball vape in the heater to heat soak before loading definitely kicked up a bit.
Thanks for the reply. Definitely helpful.
Is the v2 interchangeable will all the parts of the v1? Namely the microdose bowl and the matrix from v1?
The microdose bowl will work just fine, since the injector has the same specs. Matrix bowl too. There are two adapters for the v2. One fits the Matrix bowl better and the other more standard 22mm diffuser style bowls.
you guys are really convincing me that this is the ball vape i need! ive been looking at them for a long time now and my biggest problem is picking the device. since its a bit of an investment i want to make sure i get the best combo of function and value, and this really seems to tick all the boxes
You won’t be disappointed with it. It’s a great vape.
