It’s a bowl that’s designed for the TinyMight2 for a bong or water piece.
As far as fill material, you can get this prefilled from JCVap, but I had material from The Dab Hut on hand.
I used a mix of some SS material to help the induction heat up. Takes around 8g, ~300ish at 2.5 mm
Perfect, thanks for that great info!
They supply 200x 2mm spheres which fills the chamber up to about 80-90% capacity.
I went 50/50 SS/rubies but from all reports 100% rubies works just as well in the induction heater and should presumably have a better taste.
I’ll try all ruby in my second unit when it turns up!
Excellent, let us know how it goes. I’m hoping my Crown gets moving thru the USPS!!
The switch 2 inserts are 19mm OD x 27mm H. Based on the measurements earlier in the thread the herb cloud should fit.
I haven’t played around with the switch 2 as an induction heater for ther vapes. But depending on how the data from it’s internal IR sensor is integrated into the heating profiles, it might function as a good temp control induction heater. Plus the thermal mass of the induction cup of the switch 2 makes it kind of a induction/conduction hybrid heating.
The integrated titanium cup also means you can get induction/conduction heating for non-induction vapes.
I plan on picking up a crown soon.
Picked up a few more bowls to test
The first one is the 7-hole 19mm injector bowl from vices.
This one is cheap at $10aud because of a manufacturing issue (was meant to be a lot more than 7 holes).
This works better than the injector bowl with mesh screen I’ve been using.
Heater is closer to the herb and the increased restriction from the bowl balances out the airiness of the crown.
Second bowl is the tinymight t.bowl, yet to give this a go but the fit is perfect just like @FortyFistHits showed earlier.
Third and fourth are the Ed’s tnt 19mm injector bowl and a 14mm glass post from the adaptabowl.
Just tried the t.bowl..
Completely smacked me in the face. The amount of terps on the first heat was crazy.
I gave it three heats in the yll at 80w
45secs hit and stir
20secs hit and stir
20secs hit and dump
I have to play with an injector bowl more. This little thing is great to mess with. Works great with a torch too.
Any recommendations for a starting point with the torch?
What torch have you been using?
Ignyt Mini. I stay away from the O Ring and heat towards the middle, even dead center into the chamber a bit. Doesn’t take too long…similar timing to a DynaVap. I’ll time it next time, kinda just going by vibe and instinct at the moment lol
2mm rubies came in mine
can this be used with the wand as well or only the YLL?
I was trying this Crown with 18mm joint adapter makeshift bowl. I ordered a proepr injector bowl from VG and now this sucker is rockin!
Haven’t tried heating it with the wand but it does fit through the back.
You can’t really get it in deep enough to heat the right part but it’s still probably worth testing!
I’ll try it today. The wand only hits like 45 watts but we will see.
Wand usage, 800 to time out worked for a very nice very manageable hit.
It was preheated some by my experiment with the UB Vortex, but even so, using the wand will work but will need at least 2 heat cycles/preheat.
Nice work! I find with my heating technique in the yll, that first 45secs gives me a decent low temp heat with lots of flavour and terps. The 20 sec reheat gives me big clouds and the second reheat finishes the bowl.
I haven’t tried going for ohe since I was using 100w initially.
Are you taking multiple hits or aiming for ohe?
Typically I aim for OHE, but I’m finding with this, it really shines just as you said, initial heat up with subsequent hits getting thicker as the flavor is pretty nice and it works with induction a bit better that way.
You can still push it with induction if you want, but a one hit/heat extraction works best with a torch heat up.
